productspipe fittings, valves, aseptic diaphragm valves, aseptic tank bottom valves and other high-end products
productspipe fittings, valves, aseptic diaphragm valves, aseptic tank bottom valves and other high-end products
this type of ball valve series is a kind of sanitary valve which used to control the material transfer.it is widely used in food,
beverage processing ,pharmaceutical and chemical industry area.
3-pcs ball valves are flexible to set up and easy to be maintained online or offline,which significantly minimizes the production downtime due to valve or pipeline maintenance.
during maintenance,it is not necessary to disassemble the actuator or joint component from the valve.when the maintenance is completed,it is also convenient to re-amount the valve or actuator components; no calibration is needed.
blow-out proof stem adds safety and reliability to the full extent.
thickened stem packing;v-shaped stacking design;adjustable self-compensating gland.
muliple control modes.easy to realize remote or automatic control.
all sealing materials contacting with fluids are reinforced ptfe,in accordance with fda177.1550 and gmp standards.
support cip(clean-in-place)and sip (sterilization-in-place).
|
size |
k*d |
a |
l |
pneumatic head specifications |
|||||
|
dn |
nsp |
din 11850-1 |
din 11850-2 |
iso 2037/iso 1127 bs4825 |
3a/asme-bpe |
single acting |
double action |
||
|
dn10 |
0.5” |
34*12 |
34*13 |
25*12.7 |
25*12.7 |
90 |
85 |
nm50s |
nm50d |
|
dn15 |
0.75' |
34*18 |
34*19 |
25*19.05 |
25*19.05 |
90 |
92 |
ume0s |
nm50d |
|
dn20 |
/ |
34*22 |
34*23 |
50.5*21.3 |
/ |
90 |
92 |
nm50s |
nm50d |
|
dn25 |
1.0" |
50.5*28 |
50.5*29 |
50.5*25.4 |
50.5*25.4 |
120 |
103 |
nm65s |
nm50d |
|
dn32 |
1.25 |
50.5*34 |
50.5*35 |
50.5*31.8 |
/ |
130 |
110 |
nm75s |
nm65d |
|
dn40 |
1.5" |
50.5*40 |
50.5*41 |
50.5*38.1 |
50.5*38.1 |
140 |
117 |
nm75s |
nm65d |
|
dn50 |
2" |
64*52 |
64*53 |
64*50.8 |
64*50.8 |
150 |
132 |
nm85s |
nm75d |
|
dn65 |
2.5" |
91*70 |
91*70 |
77.5*63.5 |
77.5*63.5 |
180 |
151 |
nm95s |
nm85d |
|
dn80 |
3" |
/ |
/ |
91*76.2 |
91*76.2 |
180 |
159 |
nm95s |
nm85d |
|
dn80max |
3.5” |
106*85 |
106*85 |
106*88.9 |
/ |
210 |
177 |
nm95s |
nm85c |
|
dn100 |
4" |
119*104 |
119*104 |
119*101.6 |
119*101.6 |
240 |
207 |
nm110s |
nm95d |
|
technical parameters: |
|
|
actuatior |
stem,auto-reset stem,turbine,aluminum pneumatic actuator(single/double acting), electric actuator |
|
size |
dn10-dn100 1/2"-4" |
|
body |
one-channel body,tank bottom type body,v-shaped regulating body |
|
fuid-contacting surface |
astm a351:cf8/cf3m/2205 (304/316l/2205) |
|
non-fluid-contacting surface |
astm ss304/cf8 |
|
connection |
welded,clamped,flange,female thread,etc |
|
operation pressure |
pn16bar |
|
operation npe ture |
dependent on seal materials |
|
seal material |
ambient temperature(10~ 110 ℃):ptfe seal |
|
medium temperature (-60~ 150℃):tfm1600 seal |
|
|
high temperature(10~ 210℃):pob seal |
|
|
fluid-contacting surface roughness:ra≤0.8μm ra≤0.4μm ra≤0.25μm |
|
|
optional accessory (pneumatic) |
handwheel clutch (onlyavailable for aluminum pneumatic actuators) |
|
optional accessory(transponder) |
apl210n:ip672-npt1/2" |
|
vls1000:exd ||bt6 ip672-npt3/4” |
|
|
vls1000s:exd ||ct6 ip672-npt3/4" |
|
|
vls1121:exia lct6 ip672-npt3/4" |
|
|
vls1221:exia |lct6 p&fip67 dc 8v本安防爆2-npt3/4 |
|
|
ootional accessory(solenoid valve) |
solenoid valve air filter pressure-relief valve(plastic connector pu air pipe) ac220vac110vac380 |
|
explosion-proof solenoid valve air filter pressure-relief valve (pipe ferrule stainless steel air pipe)dc12v dc24v |
|
|
asco explosion-proof solenoid valve air filter pressure-relief valve (pipe ferrule stainless steel air pipe)dc12v dc24v |
|
|
optional accessory:nm500 intelligent positioner:set input signal at 4-20ma and output signal at 4-20ma dc 24v |
|
|
optional accessory:nm600 intelligent positioner:set input signal at 4-20ma and output signal at 4-20ma dc 24v explosion-proof level:ex ia iic t4/t6 ga |
|
